Fantini Cosmi CH150TS Series, Руководство пользователя

Страница: 21 / 28

21
Confi guring the chronothermostat
Chronothermostat con fi guration enables to
customize the operating parameters. To open
the con
fi guration program, proceed as fol-
lows:
1. Press the SET / PROG key [key 6]. The
operating mode being currently used will be
temporarily stopped and it will be resumed au-
tomatically at the end of programming.
2. Keep the SUMMER / WINTER switching key
[key 10] pressed for about 5 seconds.
Warning
: The chronothermostat shall be con-
fi gured by quali fi ed personnel only.
Every con fi guration parameter featuring preset
settings is identi fi ed on the display by an index
and a writing. To change parameter values use
keys
▲ [key 1] and ▼ [key 2]; use key ► [key
4] to move across parameters.
To go back to the initial page of the program-
ming menu, press the ENTER key [key 5]
which will save changes.
If no key is pressed within 3 minutes, the
chronothermostat will quit the con
fi guration
program and will resume the operating mode
being used previously, without saving changed
settings.
To cancel changed settings and to reset preset
con
fi guration parameter values, keep keys ▲
[key 1] and ▼ [key 2] pressed simultaneously
for about 4 seconds.