18
Important!
The standard battery service life
is more than 1 year. It is recommended that
the batteries should be replaced at the start of
the system operation season, to prevent the
batteries from running out when you are away
from home, e.g. during the summer or Christ-
mas holidays.
The batteries must be properly disposed of in
special containers.
Installation
The programmable thermostat installation in-
volves the following operations:
• Installing the batteries
• Con
fi
guring the programmable thermostat pa-
rameters
• Registering the programmable thermostat with
the radio actuators
• Fastening the socket to the wall
• Making the electric connections
• Securing the programmable thermostat onto
the socket.
Installing the batteries
Separate the socket from the programmable
thermostat by levering on the slot found at the
socket bottom by using a suitable tool. Insert two
long-life AA alkaline batteries (1.5 V) into the pro-
grammable thermostat rear (observe the correct
polarity). After installing the batteries, the pro-
grammable thermostat will turn on automatically.
Fasten the socket back again, making sure that
the multi-pole connector is inserted correctly. The
programmable thermostat will click into position.
Con
fi
guring the programmable thermostat
By con
fi
guring the programmable thermostat, the
device operation parameters can be customized.
To access the con
fi
guration program, proceed as
follows:
1. Press the SET / PROG button [button 6]. The
operating mode currently used will be temporarily
interrupted and will be automatically resumed at
the end of programming.
2. Keep the SUMMER / WINTER switching but-
ton [button 10] depressed for approximately 5
secs.
Warning! The unit must be installed only by
quali
fi
ed personnel, in compliance with the law
regulations in force.
Warning! The programmable thermostat must
be con
fi
gured only by quali
fi
ed personnel.
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
