16
3. Page 2: total number
of hours during which
the system has been
switched on and operat-
ing since its
fi
rst start-up
(16 hours in the image).
5. Page 4: maximum
temperature reached
on the current day, and
time at which such maxi-
mum temperature was
reached (22.5°C at 09.08
p.m. in the image).
4.Page 3: minimum
temperature reached
on the current day,
and time at which such
minimum temperature
was reached (15.8°C
at 03.15 a.m. in the im-
age). Use the
►
button
to go to the next page.
Use the
►
button to go to the next page.
Press the
▲
and
▼
buttons simultaneously to
reset the total system switch-on hours.
Setting the desired humidity level
The CH150RF/151RF/152RF programmable
thermostat allows you to actuate a humidistat
by setting the desired humidity value. To be
able to actuate a humidistat, it is requested
that this function will be enabled through the
technical menu (refer to the <<Programmable
thermostat con
fi
guration>> chapter). To set the
desired humidity value, proceed as follows:
1. Enter the programming menu main page.
The operating mode currently used will be in-
terrupted temporarily. Choose the time table
setting function.
6. Press the ENTER button twice to go back to
the operating mode previously used.
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
voltar.com.ua
