Fantini Cosmi CH130RFR, Руководство пользователя

Страница: 15 / 20

15
Operation check
Refer to the preceding instruction manual for
the use of the CH130RF thermostat.
• Make sure that the actuator is close enough
to the thermostat (30 m, in free air – or less, if
obstacles are found).
• Power the actuator by connecting the same
with the electric mains.
• Press the CH172DRF button: the LED will
switch among the green and red light, to indi-
cate the manual mode. Each time the button is
pressed, one or several relays will turn on: this
will be indicated by the switch-on of the cor-
responding red LEDs.
• Below is the switch-on sequence:
1°- accessing the manual mode and valve “1”
switch-on
2°- valve “1” switch-on + engine speed 1
3°- valve “1” switch-on + engine speed 2
4°- valve “1” switch-on + engine speed 3
5°- valve “2” switch-on
6°- valve “2” switch-on + engine speed 1
7°- valve “2” switch-on + engine speed 2
8°- valve “2” switch-on + engine speed 3
9°- exiting the manual mode.
• Perform a self-learning procedure, as de-
scribed above. Now, the CH172DRF and the
CH130RF will be able to communicate.
• Switch over, on the thermostat, the fan mo-
tor speed (3 relays) and the valve control (2
relays), then verify that they have actually
switched over.
Electric connections
CH130RF
V p. supply E.V. A
V p. supply E.V. B
Motor
230Vca
E.V. 2 E.V. 1