Fantini Cosmi CH130RFR, Руководство пользователя

Страница: 10 / 20

10
Thermostat con fi guration
The thermostat con fi guration allows you to
customize the device operation parameters.
To access the con
fi guration program, proceed
as follows:
1. Press the “Reset” button and also button “3”
(with the thermostat ON);
2. Release the “Reset” button, then keep but-
ton “3” depressed for at least 3 seconds.
3. Release button “3”.
The con fi guration parameters are represented
by an index (P01, P02…) on the display; by
pressing buttons “1” and “2”, the parameter in-
dexes will be scrolled through. Press button “3”
to enter the displayed parameter.
To modify the current parameter, press buttons
“1” and “2”. To exit the parameter, press but-
ton “3”.
Once all parameters have been set, press
button “1” until the “END” message appears,
then press button “3”. Now the thermostat will
save the modi
fi ed parameters into the internal
memory and will automatically exit the param-
eter menu.
On the contrary, if buttons “1” and “4” are
pressed simultaneously when the “END” mes-
sage is displayed, the CH130RF’s RF address
will be reset and the self-learning procedure
shall be performed again.
N.B. The thermostat will send the switch-on/-off
controls for the three fans and the two valves
to the actuator to a
fi xed rate of 1 minute.
Warning! The con fi guration shall be performed
only by quali fi ed personnel.