4. Maintenance
USE AND MAINTENANCE MANUAL
CHAPTER 4
MAINTENANCE
XEF 250 - Rev01 / 2020
64
D
C
2
6
7
10
10
8
9
A
B
A
B
– Check that the filtering element is not damaged, if it is,
replace it;
– Clean the filtering element with a dedicated solvent, after
cleaning remove the solvent by squeezing the filtering
element and blowing it with compressed air;
– Apply air filter oil to the filtering element, squeeze it to
remove excess oil.
The cartridge must be damp, but not wet.
– Install gasket “7” on the filtering element;
– Install guide “8” on the filtering element;
– Install filtering element “9” on guide “10”;
– Then install the guide/air filter assembly on the vehicle.
Make sure that the two projections “A” at the rear
side of the vehicle on the air filter guide are securely
fitted into the two slots “B” in the air filter case.
– Turn the plates “6” to the original position.
– Install the filter casing cover “2” making sure that the two
housings “C” on the cover are correctly inserted on the
protrusions “D” of the filter casing.
Also make sure that the two ribs, located on the
right and left side of the cover, are correctly aligned
with the protrusions on the intake ducts of the filter
casing.
– Install the initial part of the seat.
