44
GENERAL CONTENT AND CONSULTATION
Press the adjustment button (“ADJUST”) to select the correct
waveform.
The RPM pulse is defined as “Hi” (positive pulse)
and “Lo” (negative pulse).
The writing that identifies the waveform setting, flashes
during the modification operations.
If the speed (RPM) is incorrect or not correctly
displayed, select another setting and try again.
It is advisable, if the exact value is not known, not to
change the preset value. In case of need, contact an
Authorized Fantic Motor Center.
Press the selection button (“SELECT”) until the desired input
pulses value is reached.
It is advisable, if the exact value is not known, not to
change the preset value. In case of need, contact an
Authorized Fantic Motor Center.
The correct value is: 0,5.
