Fantic Caballero 500 Скачать руководство пользователя

Страница: 52 / 102

GENERAL CONTENT AND CONSULTATION

The vehicle is delivered with two keys, one of which is spare. Keep the spare key in a place other than the

vehicle.

The lights switch off when the ignition switch is positioned on “B”.

The key, besides the ignition switch, activates the tank cap.

When the vehicle is started, the lights turn on automatically.

IGNITION SWITCH

The ignition switch is located at the front of the vehicle near

the dashboard.

The functions of the ignition switch are the following:

A. The handlebar is locked and the vehicle cannot be

started and the lights cannot be switched on. The key can

be removed.

B. The vehicle and the lights can not be operated and the

key can be removed.

C. The vehicle can be put into operation but the key can not

be removed.

D. The handlebar is locked and the vehicle can not be

started. The position lights of the headlight and tail light

are activated. The key can be removed.

Содержание Caballero 500







































































































Результаты поиска

Содержание Caballero 500

Отзывы:

Похожие инструкции для Caballero 500

Бренды по названию

Популярные бренды

Fantic Caballero 500, Руководство пользователя

Результаты поиска

Содержание Caballero 500

Отзывы:

Похожие инструкции для Caballero 500

Бренды по названию

Популярные бренды