47
Functions
SPD: Speedometer
The speedometer information appears in the centre of the screen. It shows up
to 399.9 kmph or mph.
MS: Maximum speed gauge
It shows the highest speed reached since the last resetting of the data.
DST: Distance travelled
This appears on the right side, in the second line of the screen. The TRIP fun-
ction contains the vehicle’s accumulated mileage since the last RESET opera-
tion.
ODO: Odometer
It shows the total mileage accumulated by the vehicle. The data is stored in
the memory, even when the device is not running.
ART: Time of use controller
Calculates the total time in operation. It starts counting from the moment the
motor is turned on.
RT: Total time of use controller
It calculates the vehicle’s operation time since the last RESET operation. It
starts counting from the moment that movement begins. The data is stored
in the memory, even when the device is not running.
12/24 hour clock
It shows the time in either 12 or 24 hour formats.
Ambient temperature / engine temperature gauge
The ambient temperature is displayed on the upper left-hand part of the scre-
en.
The screen can display the engine temperature from an optional temperature
sensor. If this is too high, a warning LED lights up in yellow.
Setting the multifunction display parameters
After confirming each value, the display goes from one screen to the next
until all have been displayed. If no button is pressed, the display returns to the
home screen after 15 seconds.
Activating adjustment mode
To start setting mode for the multifunction display, press buttons 1, 2, and 3
simultaneously for 3 seconds, and then release.
Selecting the values for the wheel circumference
Enter the value for the wheel circumference by pressing button 1 in succes-
sion. To go on to the next digit, press button 3.
Confirm by pressing button 2.
Note:
If you do not know the value of the wheel circumference, see the section on
“Measuring the wheel circumference”
