38
To change the oil, follow the following steps:
1. Place a recipient underneath the crankcase.
NOTE
Put used motor oil in an appropriate container for recycling.
(B)
2. With the motorbike parked on a flat surface, empty the engine oil from
the sump by removing the plug (B).
(C)
3. Pull out the filter cover screws.(C).
WARNING
Always use original FANTIC MOTOR parts. If the filter is incorrectly positio-
ned, the engine oil will not flow, provoking a malfunction in the engine.
4. During the oil filter change, check the o-rings and change it if you find a
problem (crack).
(C)
5. Replace the filter cover and put the screws that secure the cover, but wi-
thout tightening them too hard (do not exceed the recommended tor-
que).
6. Put the oil cap on the carter and lock it. By the flywheel carter hole, intro-
duce 1.300 ml of oil. (H).
WARNING
The engine may be damaged if the oil is not used properly or the specifi-
cations recommended by FANTIC MOTOR are not followed. Use the type of
oil specified in the section on Petrol and Oil recommendations (see table
lubricants pag. 59).