Fantec TV-LHD, Руководство пользователя

Страница: 38 / 122

FANTEC TV-LHD
(3) After click on the “save” icon, a new window will appear as the picture on the right hand side shows,
select “Baseline (standard)” or “Baseline optimized”.
(4) Click the “OK” icon.
Why when I switch to 480P, 576P, 720P, 1080I or 1080P does the TV screen display an unwatchable
picture?
Please check if your TV supports 480P, 576P, 720P, 1080I or 1080P output, if your TV does not support,
please use the A/V signal display instead, press the TV OUT button on the remote control, then switch the
TV’s video input to NTSC or PAL.
I configured everything correctly, but still cannot get the network connected?
Are you using a firewall such as Norton Internet Security, McAfee Personal Firewall, Zone Alarm, etc. or
even the built-in firewall of Windows XP? (Don’t forget that Service Pack 2 for Windows XP or Vista
automatically upgrades your firewall and turn it on by default).
38
If you have a firewall, it may need to be configured or have exceptions created to allow you to see and
communicate with the player on the network. To test if your firewall is preventing network communication
(including PING and access shared folders), try disabling it to see if you can connect. If you can connect
with the firewall disabled, you may need to add the player to the ‘Trusted’ list or configure the firewall for
local intranet access. Worst-case, disable your firewall long enough to use the player, then enable it again
when done.