Fantec TV-LHD, Руководство пользователя

Страница: 37 / 122

FANTEC TV-LHD
37
1
1
4
4
.
.
F
F
A
A
Q
Q
-
-
T
T
r
r
o
o
u
u
b
b
l
l
e
e
s
s
h
h
o
o
o
o
t
t
i
i
n
n
g
g
When the power is on, nothing appears on the screen or the screen is flickering?
When the video output mode is not properly set, nothing may appear on the screen, the screen may be in
monochrome, or the screen may be flickering . Press “TV OUT” button of the remote control and change
the output mode until the video output mode is properly set. The Player is PAL or NTSC mode, Please
check the TV Output (NTSC/PAL).
When the player is powered on, why will the TV have a short flashing, blue screen or screensaver?
This is normal, when the system initializes, it will setup the corresponding parameters so it can output the
correct video signal to the TV, during the initializing time, the TV will receive incorrect signals or the signals
will not be stable and will cause the TV screen to flash, some TV’s will treat this as no signal, and will
display a blue screen or screensaver.
While playing a movie file, its subtitle is not shown?
The name of a movie file has to match to the name of a subtitle file or reverse. In the case of multiple
subtitles, if there is no first subtitle, subtitle cannot be shown. In this case, using the [SUB-T] button, select
the second subtitle file.
While playing a movie, there is no audio output?
In the SETUP menu, check if the audio output mode is properly set. Check the volume level.
Check if the [MUTE] function is activated.
USB device is not supported?
If you have to install hardware drivers for the devices under your operating system (OS), the compatibility
between FANTEC TV-LHD and USB device can not be garantueed.
Can the player access to the USB host port when it’s connected to PC?
No, it can’t.
Why do some photo formats, cannot be shown in the photo function?
In the JPEG format there are different modes. The player doesn’t support all the modes. So you have to
change your photo format first as follow:
(1) Use Photoshop to open the photo.
(2) Choose ”File” then “save as” from the menu, as the picture on the left hand side shows, select the
picture format as JPEG, input the file name and click the “save” icon.