GL-35DSR NAS Configuration
2 NAS Settings and User Interface
2.1 How to login
To configure your GL-35DSR LAN, open your web browser, enter the IP address or device name
of your GL-35DSR LAN and then use the web interface for further configuration. To locate the
network drive and find out its IP address, we recommend using the Discover Tool program.
Default Login
User name: admin
Password: 123456
2.1.1 Discover
Tool
The Discover Tool program can be used to locate and access the network drive on your local
network.
1. Make sure that the network drive has already been initialized, that it is connected to the
same local network as your computer and the power is turned on.
2. Wait at least 15 seconds after turning on the network drive and then start the Discover Tool.
It will automatically search for the device but if it does not find it, click Refresh to start the
search again and make sure the program is not being blocked by any firewall.
3. Once the device has been located, select it from the list and double-click on it to open the
configuration page in your web browser. By default, the user name is “admin” and the
password is “123456”. For security reasons, we strongly recommend changing the
password for the “admin” account after the first login.
EN
9/37
