7
C.
Leave as little slack as possible to the hand lanyard, so the
light is tied to the tank valve as closely as possible.
D.
Since the cone consists of positive buoyancy, the Nano LED
Pro will be pointing up during the dive.
E.
After the dive, detach the Nano LED Pro from the tank
valve and soak and rinse exterior components in fresh
water.
6. Using the Nano LED Pro as a Night Dive Light
A.
The Nano LED Pro can also be used as a night dive light.
Its compact size means that it can easily be stored inside a
BCD’s pocket and pulled out when necessary.
B.
Prior to the dive detach the cone from the flashlight’s head
by gently pulling them away from each other. Make sure
that when separating the cone from the flashlight, there is
no tension exerted on the cone’s lanyard.
C.
To get maximum light you should pull the cone off from
the end of the rubber LED cover, leaving it free and only
attached to the light by the lanyard. Or you can detach the
cone’s lanyard from the flashlight by gently pulling the
flashlight out of the plastic lanyard’s ring.
D.
Make sure batteries are properly installed (see section 1:
Installing and Removing Batteries).
E.
After the dive, carefully soak and rinse exterior
components in fresh water.
Содержание Nano LED Pro Set
Страница 1: ...1 ...
