Fantasea Nano LED Pro Set, Руководство оператора

Страница: 6 / 8

6
4. Assembling the Cone and Multi-Colored Plastic Disks
A. Detach the cone from the flashlight’s head by gently
pulling them away from each other. Make sure that when
separating the cone from the flashlight, there is no tension
exerted on the cone’s lanyard, which is wrapped around
the flashlight.
B. Choose one of the colorful plastic disks included with the
kit.
C. Push the chosen plastic disk into the white plastic cone,
until it is positioned inside the dedicated track. Note that
the shiny side of the disk should be positioned towards the
bottom open part of the cone.
D. Cover the flashlight head with the open side of the cone, so
it wraps around it. The cone on the flashlight's head is held
in place by friction.
E. When turned on, the Nano LED Pro emits a diffused colorful
light.
F. In order to replace the colored plastic, detach the cone
from the flashlight head, and pull the disk out from the
open side of the cone, by gently pulling the string attached
to the disk. Follow steps A-D in order to insert the new
colored disk into the cone.
5. Using the Nano LED Pro as a Signaling Device
A. When turned on, the Nano LED Pro can be used by divers
as a signaling device.
B. Tie the flashlight’s hand lanyard to the diver’s equipment.
The best way to do this is to tie the hand lanyard around
the tank valve, where the regulator’s first stage is
connected to the tank.