5
G.
It is recommended to occasionally apply a slight amount of
silicone grease to the black O-ring seal found on the
flashlight after unscrewing the flashlight head
counterclockwise.
H.
In order to attach the cone to the flashlight again, simply
cover the flashlight’s head with the open side of the cone,
so it wraps around it. The cone on the flashlight's head is
held in place by friction. There is no need to force the cone
down on the rubber light cover, but it should be attached
firmly to assure that it is watertight and does not allow
water to seep into the cone. The cone is what gives the
necessary buoyancy to the Nano LED Pro.
3. Turning the Nano LED Pro On/Off
A.
It is recommended that you detach the cone from the
flashlight’s head prior to turning the Nano LED Pro on/off in
order to prevent tension from being exerted on the cone’s
lanyard.
B.
In order to switch the light on, carefully turn the flashlight
head counterclockwise just enough for the light to turn on.
Once the light is turned on, do not keep turning the
flashlight head counterclockwise, or else the
watertight seal of the light will be damaged.
C.
In order to switch the light back off, turn the flashlight
head in a clockwise fashion to the end. Please note that
there is never a need to use force when closing or opening
the light or turning it on or off.
D.
Please note: If you are turning the flashlight head more
than half a turn and nothing happens, you are probably
turning it the wrong way.
Содержание Nano LED Pro Set
Страница 1: ...1 ...
