FANOX SIA-C, Руководство пользователя

Страница: 134 / 188

www.fanox.com Rev.26 134/188
7.9. Menus
7.9.1. Standby mode screen
The default screen shows the device model and the currents in phase A, phase B, phase C, and
Neutral. Press “OK” to select a menu: measurements, states, settings, and events. If the HMI is left
in any state, it will return to the default screen after 5 minutes without any key being pressed.
SIAC11531112AA
0.00 0.00 0.00 0.00
C
(A) (B) (C) (N)
0.00 0.00 0.00 0.00
C
SIAC11531112AA
0.00 0.00 0.00 0.00
If any error is detected by the self-diagnosis, an error message appears in the second line
(instead of the currents) on the main screen, which can show any of the following information:
(see inside self-diagnosis section).

PROTECTION ERROR

MEASUREMENT ERROR

EEPROM ERROR

TRIP POWER ERROR
7.9.2. Accessing the menus
The keys ▲, ▼, ◄ and ► are used to navigate through the different options and menus. The
“OK” key is used to accept and to enter a menu or an option. The “C” key is used to move up
through the menu levels.
It is not necessary to enter any password to read or view the parameters, measurements,
settings…
A 4-character password must be entered in order to modify any parameter.
After returning to the main screen, the password must be entered again to make any further
modifications.
The keys ◄ and ► are used to navigate from one item to another within a parameter. The keys
▲ and ▼ are used to increase or decrease the value. If an invalid value is entered during the
process, the “C” key can be used to delete it.
The navigation through the menus is described as graphically as possible below.