FANOX SIA-C, Руководство пользователя

Страница: 133 / 188

www.fanox.com Rev.26 133/188
7.8. Setting-up the session: Password and access levels
Users must identify themselves with a password in order to start communications and to
change the equipment settings or configuration using the HMI. Depending on the access level,
it may or may not be possible to perform the operations shown on the table below.
ACCESS
LEVEL Read-only
permission:
Status and
measurements
Settings
Events
Permission to:
Change settings
Download and
Delete the
Events buffer
Permission to:
Execute
Commands
Permission to:
Change
Configuration
Permission to
Change
Protected
Settings
1 YES YES NO NO YES
2 YES YES NO NO NO
3 YES NO YES NO NO
4 YES YES YES NO NO
5 YES YES YES YES NO
Four passwords and their associated levels of access are set up when the equipment is
configured using the SIcom program. The password must be made up of 4 characters
(passwords with more or less characters will not be accepted). By default, the equipment is
programmed with the following passwords and their associated levels:
PASSWORD ACCESS LEVEL
2222 2
3333 3
4444 4
5555 5
The SIA-C does not have a command feature.
The SIA-C does not have a protected settings feature.