11
Motor
Assembly
How to Assemble Your Light Kit or Cap
Figure 1
1.
Remove one of the three screws in the support
bracket at the bottom of the motor assembly. Retain
the screw for later and slightly loosen the remaining
two screws. (Figure 1)
Figure 2
Figure 3
Light Kit
Wire Cover
2.
Assemble the light kit wire cover to the support
bracket of the motor assembly using the two key slots
in the light kit wire cover. Replace the previously
removed screw and securely tighten all three screws.
(Figure 2)
Option A--for use with steel cap
NOTE:
If installing the light kit, please skip to Step 4.
Light Kit
Wire Cover
Steel Cap
3.
Assemble the steel cap to the light kit wire cover by
twisting in a clockwise direction. (Figure 3)
1.
Secure the blades to the bottom of the motor
assembly using the 3/16
”
-24 serrated head screws
and blade plates. Be sure the groove in the flywheel
is lined up with central hole on the blade. (Figure 1)
NOTE:
Periodically check blade hardware and
resecure if necessary.
How to Assemble Your Ceiling Fan Blades
x 9
3/16
”
-24
Serrated Head Screws
HARDWARE USED:
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled may
result in damage to the fan blades.
CAUTION
WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing or cleaning the fan.
Do not insert foreign objects in between the rotating
blades.
Blade Plate
Blade
Figure 1
Motor Assembly
3/16
”
-24 Serrated
Head Screw
(3 each per blade)
Groove
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing
your light kit.
