background image

How to Hang and Wire Your Ceiling Fan 

7

WARNING

It  is  critical  that  the  outlet  box  and  the  screws  are 

securely anchored to the building structure and capable 

of withstanding a load of at least 35 lbs.  Failure to verify 

that the screws are properly installed could result in the 

fan falling. (Figure 2)

Figure 1

WARNING

To avoid possible electrical shock, be sure electricity is 

turned off at the main fuse box before hanging.

NOTE: If you are not sure if the outlet box is grounded, 

contact a licensed electrician for advice, as it must be 

grounded for safe operation.

WARNING

The fan must be hung with at least 7´ of clearance from 

floor to blades. (Figure 1)

Floor

Ceiling

No

less than

7 ft

1.

  Using the  / 

3 8

    “ x 2” lag bolt and flat washer, attach 

safety cable to ceiling joist or wood structural member. 

The lag bolt will pass through the flat washer, safety 

cable loop, and into the building structure (Figure 2). You 

will first drill a ¼ “ pilot hole into the building structure to 

prevent splitting or cracking.

2. 

The ceiling support cable need to through the center 

hole of ceiling bracket when mounting. Using the two 

#8-32 screws securely attach the ceiling bracket gasket 

and ceiling bracket to ceiling junction box as shown. 

(Figure 2) 

 

Ceiling 

Bracket 

Gasket

Figure 2

Wood  Member

(2 “x 4” Approx.)

Ceiling Joist

Ceiling

Junction

Box Screw(2)

Junction Box

Ceiling

Support

Cable

Ceiling Bracket

Figure 3

fan wires omitted for clarity

NOTE:

Supply wires and

3.

  Attach the safety cable to ceiling support cable. 

Slide cable clamp onto safety cable (from fan). Place 

the end of cable through the loop of ceiling support 

cable. Pull asmuch cable through loop as possible. 

Feed end of cable into clamp hole and firmly tighten 

screw (Figure 3).  Cut off excess safety cable.

4.

  Make sure the electrical supply wires, including the 

ceiling bracket grounding wire and safety cable are 

pulled through the downrod, between the ceiling 

bracket and the junction box so that electrical 

connections can bemade later. 

Содержание EMBRACE FPS7955B






































Отзывы: