Fanimation EMBRACE FPS7955B, Руководство пользователя

Страница: 10 / 37

How to Assemble the Ceiling Fan Blades (continued)
How to Assemble the Light Kit or Cap
10
HARDWARE USED:
x 6
SCREWS
NOTE:
Periodically check blade holder hardware and
resecure if necessary.
2. Secure the blade holders to the bottom of the motor
assembly using the 1/4 -20 screws. (Figure 2)
To reduce the risk of personal injury, do not bend the
blade holders when installing, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between the rotating blades.
WARNING
!
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
CAUTION
Blade Holder
Motor
Assembly
Figure 2
Screws
(2 per assembly)
1. Remove one of the three screws in the support
bracket at the bottom of the motor assembly. Slightly
loosen the remaining two screws. Assemble the light
plate assembly to the support bracket using the two key
slots in the light plate. Replace the third screw and
securely tighten all three screws. (Figure 1)
2. Remove one of the three screws in the light plate
assembly. Slightly loosen the remaining two screws.
Retain the screw for later. (Figure 2)
Light Plate Assembly
Figure 2
Light Plate Assembly
Motor
Assembly
Figure 1