How to Assemble Your Ceiling Fan Blades (Continued)
13
NOTE:
Periodically check blade holder hardware and
resecure if necessary.
3.
Secure the blade holders to the bottom of the motor
assembly using the 1/4˝-20 screws from the hardware bag.
(Figure 3)
To reduce the risk of personal injury, do not bend the
blade holders when installing, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between the rotating blades.
WARNING
!
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
CAUTION
Blade Holder
(2 per assembly)
x 10
HARDWARE USED:
Figure 3
1/4˝-20 Screws
Motor
Assembly
How to Assemble Your Light Kit Assembly
Figure 1
Figure 2
1.
Remove one of the three screws in the support
bracket and retain the screw for later. Slightly loosen
the remaining two screws. (Figure 1)
Motor
Assembly
Light Plate
Assembly
2.
Assemble the light plate assembly to the adaptor
plate of the motor assembly using the two key slots in
the light plate assembly. Replace the third screw and
secure all three screws. (Figure 2)
1/4˝-20
SCREWS
