GreenLinkBox ELT
General introduction
GB 1
1.
General introduction
This manual has been compiled with the utmost care. If, however, you should discover an error, please inform
Fancom B.V.
1.1
Documentation with the control computer
The documentation consists of the following manual:
•
Installer's manual
The installer's manual is intended for installers. This manual supplies information about connecting and
configuring the GreenLinkBox ELT.
Always keep this manual close to the GreenLinkBox ELT.
1.2
How to use this manual
Fancom uses the following symbols in this manual:
Suggestions, advice and remarks with additional information.
Warning indicating damage to the product if procedures are not carefully observed.
Warning indicating a hazard for humans or animals.
Example of an actual application of the described functionality.
Example of a calculation.
Describes the combination of keys required to access a certain screen.
Decimals
The control computer and this manual use a decimal point in values. For example: a weight is shown as 1.5 kg (not
as 1,5 kg).
1.3
Fancom helpdesk
For any questions and support, please contact your local Fancom Sales & Service Centre.
1.4
F-Central FarmManager
Virtually all Fancom equipment can be controlled and managed from a central location. This requires the F-Central
FarmManager software package and a communication module. The screens in the control computers are also used
in F-Central FarmManager. This means you can start working immediately.