background image

5

 

ATTENTION

• 

The device must not be exposed to rain or humidity in order to avoid risk of fire and the danger 

of electric shock.

• 

Operating temperature: 15°C – 35°C room temperature

• 

Long playing may cause health risks. Take a break of 5 minutes every 20 minutes, and do not 

play for more than 2 hours per day.

• 

We strongly advise you to not drive a vehicle immediately after using a video game.

• 

Utilization of the vibration and Force Feedback function may cause damage to your health.

• 

In case of interference with other wireless 2.4 GHz devices,the interfering devices must be 

removed or switched off.

• 

Not intended for children under the age of 6 years. Contains small pieces. Danger of swallowing!

• 

Do not open the casing of the device when connected to electrical power or connected to wheel 

base.

• 

This device contains components that cannot be repaired by the user. Proper handling of product 

needed for warranty reasons.

 

WARNING!

 Electrical Safety

The Universal Hub must be used with ClubSport Wheel Base  as an appropriate power source:

• 

For the used ClubSport Wheel Base  use only the power supply and AC power cord that came 

with your ClubSport Wheel Base  or that you received from an authorized repair center.

• 

For the used ClubSport Wheel Base  do not use non-standard power sources, such as generators 

or inverters, even if the voltage and frequency appear acceptable. Only use AC power provided 

by a standard wall outlet.

• 

Find more detailed information about this in the ClubSport Wheel Base user manual or on 

www.fanatec.com/support

To avoid damaging the Universal Hub:

• 

Do not expose your Universal Hub to sources of heat.

• 

When connecting and / or disconnecting the Universal Hub to / from ClubSport Wheel Base  

take care of the pins inside the quick release.

• 

Do not try to use the Universal Hub with a wheel base beside the Fanatec ClubSport Wheel 

Base .

• 

Do not try to use the Universal Hub with an external power source.

• 

Unplug the power cord of your ClubSport Wheel Base  during storms or when unused for long 

periods of time to protect also your Universal Hub.

• 

If the Universal Hub becomes damaged in any way, stop using it immediately and contact 

Fanatec Customer Support..

GENERAL

1

Содержание Clubsport




































Отзывы: