10
5.2 Mounting FunkySwitch
TM
and button boxes
Open the case of the hub by loosing the four screws on the backside.
Mechanical:
The button boxes and FunkySwitch
TM
must be mounted between the main body
front plate and the wheel rim.
In case you only install a single button box on one side you need to use washer
W1 (13.5 mm x 2.5 mm) between the wheel rim and the hub base in order to
avoid the rim being slanted.
Please notice that the FunkySwitch
TM
cable is
bigger in diameter and there is only one of the
rubber cable protectors suitable for the Funky-
Switch
TM
cable. It is located on the right hand
side as shown on the picture:
Use allen key 3mm
Содержание Clubsport
