background image

31

TRADEMARKS

10

Problem description

Solution

In driver window the button mapping seems to be 

wrong as button boxes are not shown.

The buttons of the button boxes are mirrored 

from the buttons on the top side of the Universal 

Hub. For more detailled description please see 

chapter 7 (Electronic connectors) of this user 

manual.

It is not possible to flip the tuning display of the 

Universal Hub.

Due to the design it is not possible to flip the 

tuning display, it must be pulled out and pushed 

back in to the position you want to use it. See 

chapter 5.6 (tuning display) of this user manual 

for more detailled description.

The tuning display does not show anything or is 

not working partially.

Pull out the tuning display from the Universal Hub 

and check if all pins are there and not bent or bro-

ken.
Check the pins inside the quickrelease of the Uni-

versal Hub, these must not be bent or damaged.

Center calibration is not working because of miss-

ing d-pad / sticks.

For the Universal Hub there is a different button 

combination. See description in chapter 6.1 (Hot-

keys) of this user manual.

The USB port on the Universal Hub bottom side 

does not send data to your mobile phone.

This USB port is only used for charging your mo-

bile phone while playing. Apps and data tranfer 

from games to the apps are responibility of the 

app developer / provider.

The USB port does not charge your mobile 

device.

Make sure you use the USB connector cable 

which came with your mobile phone or a USB 

cable which is made especially for your mobile 

phone.
If you want to charge a tablet instead of a mobile 

phone please note that some models of tablets 

may need a stronger power source for charging 

than the USB port.

“PlayStation

®

”, “PlayStation 3

®

” and “PS3

®

” is a trademark of Sony Computer 

Entertainment Inc. All rights reserved.
“SPARCO

®

” is a registered trademarks of SPARCO

 

Italy. All rights reserved.

“MOMO

®

” is a registered trademarks of MOMO

 

Srl., Italy. All rights reserved.

“OMP

®

” is a registered trademarks of OMP Racing Spa,

 

Italy. All rights reserved.

“FANATEC

®

” and “Endor

®

” are registered trademarks of Endor

®

 AG/Germany. 

All rights reserved.

Содержание Clubsport




































Отзывы: