26
6.3 Tuning menu
The tuning menu is shown on the tuning display on the Fanatec Steering Wheels
after activating the tuning menu by pressing the tuning menu button (see chap-
ter ‘Hotkeys’ of this user manual). To navigate through the tuning menu press
up, down, left and right direction at the FunkySwitch
TM
of the Fanatec Steering
Wheel or turn the FunkySwitch
TM
clockwise / counter clockwise. Note: At the
ClubSport Universal Hub you can also use the D-Pad buttons on top of the
Universal Hub so you do not need to attach the separate FunkySwitch
TM
.
6.3.1 S_1 … S_5 (Setups)
Setups range: S_1 ... S_5
Setups default: S_1
The ClubSport Wheel Base V2 provides five different setups to store your ad
-
justed values independent from each other. To change the used and active
setup press up or down direction at the FunkySwitch
TM
of the Fanatec Steering
Wheel or turn the FunkySwitch
TM
clockwise / counter clockwise.
6.3.2 SEN (Sensitivity)
SEN range: 090 … 900 OFF/Aut SEN default: OFF/Aut
The Sensitivity defines the steering angle. If SEN is set to 090 the steering wheel
only can be turned 90° (45° to left and 45° to right side direction from calibrated
center position). If SEN is set to 900 the steering wheel can be tunred the me
-
chanical maximum way of 900° (450° to left and 450° to right side direction from
calibrated center position). If SEN is set to OFF/Aut the sensitivity is controlled
by the PC driver (see chapter PC driver for more details) or even some games
support this feature (e.g. Codemasters F1 and GT5). To change the used and
active value press up or down direction at the FunkySwitch
TM
of the Fanatec
Steering Wheel or turn the FunkySwitch
TM
clockwise / counter clockwise.
Since Firmware 094 the value OFF will be called “Aut”. This means that our
driver and games can change this setting automatically by remote.
6.3.3 FF (Force Feedback)
FF range: OFF 010 … 100
FF default: 100
The Force Feedback defines the maximum strength of the motor when force
feedback effects from software / games are sent to the ClubSport Wheel Base
V2. If FF is set to OFF, there will be no force feedback effect executed by the
ClubSport Wheel Base V2 motor. If FF is set to 010, the motor will execute only
10% of the maximum motor power. If FF is set to 100, the motor will execute
100% of the maximum motor power. To change the used and active value press
up or down direction at the FunkySwitch
TM
of the Fanatec Steering Wheel or
turn the FunkySwitch
TM
clockwise / counter clockwise.
