16
The ClubSport Wheel Base V2 has an own firmware handling the device com
-
munication to PC or PlayStation 3 as well as to other hardware peripheral de-
vices like shifters and pedals. And the firmware provides different functions for
the user.
6.1 Firmware and driver update
The firmware and the PC driver can be updated to newer versions by Fanatec
for software bug fixing or introduction of new features and compatibilities.
Before first use the ClubSport Wheel Base V2 must be updated to the latest
firmware version which is available on our website www.fanatec.com/support.
You must also use the latest driver version in order to use the ClubSport Wheel
Base V2 on a PC.
Run the downloaded file(s) and follow the instructions shown on the screen.
See more detailed description later in this user manual chapter.
IMPORTANT:
The ClubSport Wheel Base V2 is secured by firmware
and by driver so that usually it is not possible to install wrong firmwares
on the ClubSport Wheel Base V2! Do not try to force installation of any
wrong firmware to the ClubSport Wheel Base V2 to avoid damages.
IMPORTANT:
After firmware update the center position of the Club
-
Sport Wheel Base V2 must be manually calibrated again. This is also in-
dicated by the LED display of the attached steering wheel showing ‘CAL’.
This appearance will be gone after manual calibration of the wheel center.
See chapter ‘Hotkeys’
‘Wheel center calibration’ for more details.
IMPORTANT:
After firmware update the H-pattern shifters connected
to the ClubSport Wheel Base V2 must be manually calibrated again. See
chapter ‘Hotkeys’
‘Shifter calibration mode’ for more details.
FUNCTIONS & FEATURES
6
