43
DEUTSCH
ENGLISH
Specifications:
Troubleshooting:
The following overview is intended as an aid to rapid troubleshooting. If you are unsure,
contact the manufacturer, the dealer or appropriate specialist personnel. Never open the
device by yourself!
If the above error corrections have not been successful, please contact our service staff.
You can find the contact details at www.musicstore.de.
Symptom
Error Correction
No Function
Check the network connection and its fuse.
No sound from speaker, but
power LED lights up
Check the cable connections at the inputs and outputs
The speaker or XLR cables are defective. Please replace
Amplifier switches to protec-
tion mode (red Protect LED
lights up)
Short circuit at the loudspeakers or cables
Overheating due to low impedance of the loudspeakers.
Lack of air supply due to unfavourable installation location of the
amplifier
Overload due to power failure (cable cross sections too thin for power
cables).
Model
MS 5002 DSP
MS 8002 DSP
MS 12002 DSP
Capacity 8 Ohm
Stereo Operation
2x 350 Watts
2x 550 Watts
2x 720 Watts
Capacity 4 Ohm
Stereo Operation
2x 520 Watts
2x 820 Watts
2x 1120 Watts
Capacity 8 Ohm
Bridge Operation
1040 Watts
1640 Watts
2240 Watts
Frequency
(Bypass)
20Hz - 20KHz -1dB
20Hz - 20KHz -1dB
20Hz - 20KHz -1dB
Input Sensitivity
775mV
775mV
775mV
Signal to Noise
96dB
96dB
96dB
THD 50% Pmax
(1KHz)
0,07%
0,07%
0,07%
Damping Factor
(1KHz)
>200
>200
>200
Crosstalk
>65dB
>65dB
>65dB
Class
AB
H
H
Cooling System
2 Phase Fan
2 Phase Fan
2 Phase Fan
Power Supply
AC: 220-230V 50Hz
AC: 220-230V 50Hz
AC: 220-230V 50Hz
Safety
Soft Start, Short Circuit, Limiter, DC Fault, AC Line Fuse, Thermal Cut
Weight
13,8Kg
16,6Kg
19,1Kg
