40
DEUTSCH
ENGLISH
Navigating from the Root menu to Main menu with Password
Once the password is set, only the Root menu is accessible. When branching to the Main menu,
the system is requesting the password. Use the Rotary Function Dial to select numbers [0-9]
for each of the 4 digits. Press short the Push Button to move to the next digit.
The entry can be terminated any time by long press the Push Button. For a brief moment the dis-
play indicates if the correct or wrong password has been entered.
Set/Change
If no password is set the screen requests to enter a new code.
If a password is set the system requests a confirmation of the old code, before entering the new
code.
Erase
This menu item is available if previously a password has been allocated.
A confirmation of the existing code is requested before a new password can be set.
Reset Menu
Clear PowerOn ( PowerOn löschen)
Removes the selected preset and loads the default settings. This action takes place after confirmati-
on. The PRESET screen in the Root menu displays: ‘Default Settings’.
At next power-on, the default settings are loaded.
Clear Settings
All Input and Channel settings are reset to their default settings. If a preset was loaded, the ‘(mo-
dified)’ in the PRESET screen of the Root menu indicates this action. This action is not stored to the
selected preset.
Without storing, the originally last selected preset will be loaded at next power-on.
Factory Default
After confirmation, all stored presets and the password are deleted.
All settings are reset to their default settings.
Existing factory presets are left untouched if a ‘Factory Default’ will be executed.
Note: If the system is password protected, the Factory Default, Clear PowerOn and Clear
Settings can’t be executed without valid code entry.
Default Settings
At first power-on, all Input and Channel settings are set to their default values. These settings
correspond to a flat signal response between Input and output.
RESET
Clear PowerOn
Clear Settings
Fact. Default
EXIT
