Famastil Furadeira, Инструкция по эксплуатации

Страница: 30 / 32

30
ENGL
IS
H
DOUBLE SPEED (PIC 8)
The dual speed function gives
to the user the ability to set the
maximum speed to be achieved by
the screwdriver. The speed
I
will have
higher torque and less rpm, as speed
II
gives a greater number of rotations, but
with a reduced torque capacity.
PIC 8
SPEED
II
SPEED
I
The automatic spindle lock allows you
to use your drill a regular screwdriver,
You can give an extra twist to firmly
tighten a screw, loosen a very tight
screw or continue working when the
battery energy has expired (See PIC 9).
For manual screwdriver purposes, the
chuck is automatically locked when the
tool is off.
AUTOMATIC SPINDLE LOCK
PIC 9
WARNING!
To prevent damage to the gears, do not change the speed with the
chuck on movement. Wait until it is completely stopped to make the change.
HINTS FOR OPTIMUM USE
DRILLING
• Always apply a light pressure in a
straight line with the drill bit.
• Just before the drill tip breaks through
the other side of the workpiece,
decrease pressure on the tool.
• Use a block of wood to back up
workpieces that may splinter.
• Use spade bits when drilling large
diameter holes in wood.
SCREWDRIVING
• Always use the correct type and size of
screwdriver bit.
• If screws are difficult to tighten, try
applying a small amount of washing
liquid or soap as a lubricant.
• Always hold the tool and screwdriver
bit in a straight line with the screw.