Famastil Furadeira, Инструкция по эксплуатации

Страница: 27 / 32

27
ENGL
IS
H
ASSEMBLY INSTRUCTIONS
PIC 1
FITTING AND REMOVING THE BATTERY
To fit the battery, connect it directly
under the base of the screwdriver until
you hear a click (PIC 1).
To remove the battery, press the side
buttons and pull the battery in the
opposite directionto the screwdriver.
01
01
02
03
04
05
02
FITTING AND REMOVING A DRILL BIT OR
SCREWDRIVER BIT
This tool is fitted with a keyless chuck to
allow for an easy exchange of bits.
First remove the battery from the tool.
Lock the tool by setting the
direction
selector (9)
to the centre position.
Open the chuck by turning the front
part with one hand while holding the
rear part with the other (PIC 2).
Insert the bit shank (13) into the chuck.
Firmly tighten the chuck by turning the
front part with one hand while holding
the rear part with the other.
PIC 2
OPEN CLOSE
12V LI-ION BATTERY
The battery of this F-Power Screwdriver was developped with the most advanced
system of power storage avaible for portable tools.
This battery is able to store up to three times more energy than a regular Ni-Cd or
NiMH battery, and achieve a release of energy up to 100% higher than the models
mentioned, which creates a higher torque capacity to your tool. Another big
advantage of Li-Ion battery is that it has no memory effect.
OPERATING INSTRUCTIONS
WARNING! Let the tool work at its own pace. Do not overload!