16
UPS Component Overview
AC Terminal Block:
Hardwired terminal block
for input, output and transformer
interconnections to UPS Inverter.
Battery Pack Compartment:
Compartment
housing the 48V battery pack for the SSGR
models. The front panel and support bracket
must be removed to expose compartment.
Battery Fuse:
These protection devices are
required for proper UPS operation and
protection against over-current condition.
Battery Circuit Breaker:
This protection device
is used to disconnect the battery voltage from
the UPS inverter module.
Input Circuit Breaker:
One or more protection
devices provided to protect the UPS input from
an over-current condition.
Cooling Fan:
One or more devices provided to
maintain the proper temperature of the internal
electronics.
Battery Connection:
When the cover plate is
removed, this universal port is exposed to allow
connection of an SSGR battery bank.
REPO Interface:
Remote Emergency Power
Off provides an interface for a NFPA 70, NEC
645-11 compliant shut off closed loop switch.
Communication Option Slot:
When the cover
plate is removed, a card slot is available for
options, i.e., SNMP / HTTP Web Interface &
Dry Contact Relay Cards.
RS-232 Connector DB-9F Port or USB Port:
Two connectors provided to access the
system’s RS-232 protocol.
Содержание SSG6KRM-2
