Falcon SG1.5K-1SC, Руководство пользователя

Страница: 20 / 42

19
4.3.2 LCD Panel
4.3.2.1 Start-up in Normal AC Mode
1. Verify the AC mains outlet is properly grounded.
2. Ensure the voltage rating of power source is within the UPS specification.
3. Plug in UPS to the AC source.
4. After 5 seconds, the UPS will detect AC power and then initialize. LED /
LCD indicators will all be lit and dim once, then the fan will start spinning.
5. Press the UPS On button and hold until 2 beeps are heard. The
UPS will switch to online mode within 5 seconds. LCD display will be
shown as listed in figure-A and then figure-B sequentially. LEDs
will
light up to indicate that the Utility and the Bypass are normal. And then "
"," "," LED remain lit during figure-B LCD display.
A
B
*NOTE* When you see figure-B, the start-up procedure is finished. If it is a newly
installed unit, ensure that the UPS is in online mode for at least 4 hours for full
recharge before the first backup test.