INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
24
ArtNo.280-0032 - Assembling the Anti-tip bracket
�
�
�
�
�
ArtNo.070-0006 - Anti-tip mounted to wall
ArtNo.280-0033 - Anti-Tip fixed to floor
ArtNo.070-0001 - Fitting the restaining chain
Fig.7-7
Fig.7-10
Fig.7-9
Fig.7-11
ArtNo.011-0020 - Positioning anti-tip bracket
����������������
����������������
�
�����
Fig.7-8
Stability Bracket and Chain
A stability bracket and chain should be fitted when
the cooker is connected to a flexible gas supply.
Unless properly installed, the cooker could be tipped by
leaning on the door. Injury might result from spilled hot
liquids or from the cooker itself.
IMPORTANT:
The cooker must be set to the correct height
and levelled before the stability bracket is installed.
Floor Attachment
Fit the bracket base
(1)
and bracket extension
(2)
together
and secure using the screws
(3)
supplied
(Fig.7-7)
.
Dimension ‘A’ should be set to give a clearance of about 6 mm
above the centre channel of the cooker base
(Fig.7-8)
.
The assembled bracket should be firmly secured to the floor
(Fig.7-9)
to give a minimum engagement of 50 mm in the
centre channel of the cooker base.
Wall Attachment
When floor attachment is impracticable and provided that
the stability bracket base can be securely fixed to a solid wall
or wall stud
(Fig.7-10)
. Discard the bracket extension
(2)
.
For both floor and wall attachment it is essential to
use the appropriate fixing screws and to ensure that
the stability bracket is firmly attached.
Fitting the Restraining Chain
The restraining chain MUST be fitted.
The length of chain between the appliance and the wall fixing
should prevent strain on the gas and electricity connections,
but still allow access to unhook the chain when the cooker is
pull forward.
Fix the supplied hook securely to the wall.
Measure the length of chain required. Use the hexagon-
headed screw, washers and bolt supplied in the restraining
chain kit to fix the chain to one of the holes at the top of the
flue trim bracket
(Fig.7-11)
.
Hook the other end of the chain to the wall fixing.