Falcon Mercury 1082 Induction, Руководство пользователя и инструкции по установке

Страница: 14 / 36

10
ArtNo.324-0009 Tall oven shelf
ArtNo.324-0010 Plate warming shelf
Fig.2-18
Fig.2-16 Fig.2-17
Fig.2-19
Fig.2-20 Fig.2-21
Fig.2-22
Fig.2-25 Fig.2-24
Accessories
Oven Shelves
The cooker is supplied with the following:
Left-hand Oven
1 standard shelf (Fig.2-16)
1 drop shelf (Fig.2-17)
1 telescopic shelf with runners (Fig.2-18)
1 set of side supports (Fig.2-19)
Right-hand Oven
4 flat cooking shelves (Fig.2-20)
1 plate warming shelf (Fig.2-21)
1 set of side supports (Fig.2-22)
To Remove and Refit the Shelves
The shelf has a small kink on either side
(Fig.2-23)
. To remove
the shelf, line these up with the stops in the shelf support
(Fig.2-24) . Lift the shelf upwards so that it will pass over the
shelf stop and then pull it forwards (Fig.2-25) .
Refit in the reverse order, making sure to push it fully back.
To Remove and Refit the Telescopic Shelf and Runners
Slide the shelf out on the runners. While holding one of the
runners securely, carefully lift the rear of the shelf upwards:
the shelf will spring clear of the central restraining tab. Repeat
for the opposite side of the shelf.
Note: To aid the removal of the shelf you can insert a suitable
flat tool through the opening in the side of the runners and
lever the shelf clear (Fig.2-26) .
Tilt the front of the shelf downwards and then lift clear of the
runners (Fig.2-27) .
Refit in the reverse order, making sure to push the shelf down
onto the runner arms.
To Remove and Refit the Ladder Shelf Supports
Lift the ladder support hooks out of the two locating holes in
the oven side (or divider) before lifting the support clear of
the bottom ladder restraint.
Refit by inserting the bottom of the ladder into the restraint
before fitting the hooks through the locating holes.
Oven Shelves – Right-hand (Tall) Oven
When using the tall oven, you can cook on all four shelves at
the same time, but make sure that they are well spaced out
allow the hot air to circulate.
Fig.2-23
Fig.2-27 Fig.2-26