Falcon Mercury 1082 Induction, Руководство пользователя и инструкции по установке

Страница: 19 / 36

15
1 2 3
Ovens
Base Tray
The ovens have a removable base tray, which can be easily
removed for cleaning.
Wash the base tray with a proprietary enamel cleaner, or
using our recommended Rangemaster cleaning solution.
Alternatively, wash the base tray in a dishwasher.
‘Cook & Clean’ Panels
The ovens have side ‘Cook & Clean’ panels which have been
coated with a special enamel that partly cleans itself. This
does not stop all marks on the lining, but helps to reduce the
amount of manual cleaning needed.
These panels work better above 200 °C. If you do most of your
cooking below this temperature, occasionally remove the
panels and wipe with a lint free cloth and hot soapy water.
The panels should then be dried and replaced and the oven
heated at 200 °C for about one hour. This will make sure that
the panels are working effectively.
n n
DO NOT use steel wool (or any other materials that
will scratch the surface).
n n
DO NOT use oven cleaning pads.
The Oven Shelf Supports
The shelf supports on the oven sides can be removed for
cleaning.
To Remove and Refit the Telescopic Shelf and Runners
Slide the shelf out on the runners. While holding one of the
runners securely, carefully lift the rear of the shelf upwards:
the shelf will spring clear of the central restraining tab. Repeat
for the opposite side of the shelf.
Note: To aid the removal of the shelf you can insert a suitable
flat tool through the opening in the side of the runners and
lever the shelf clear (Fig.5-6) .
Tilt the front of the shelf downwards and then lift clear of the
runners (Fig.5-7) .
Refit in the reverse order, making sure to push the shelf down
onto the runner arms.
Removing the Oven Shelf Supports
Remove the oven shelves. Pull the top of the shelf support up
and away from the oven side and then lift the support away
from the locating bracket at the bottom of the oven side
(Fig.5-8)
.
Refitting the Oven Shelf Supports
To refit the side support. Locate the tag at the bottom of the
support into the slot in the locating bracket in the oven side
(Fig.5-9) . Now locate the tops of the side arms in the holes at
the top and gently push down.
The Tall Oven
To clean the oven sides, slide out the shelves, unhook the
supports from the oven sides and lift out
(Fig.5-10)
.
Fig.5-6 Fig.5-7
Fig.5-8
Fig.5-9
ArtNo.320-0022 Tall oven side support
Fig.5-10