Falcon FN10K-2TXI, Руководство по эксплуатации для владельца

Страница: 8 / 50

8
3.0 UNPACKING THE UPS AND BATTERY BANK
Due to their size and weight, FN -2TXI model UPS units and optional battery banks are shipped secured to
shipping pallets. Removal of the UPS and battery bank should never be attempted by one person.
Upon unpacking the UPS or battery bank, verify the following items were shipped. Should you have not
received any of the items listed below, please contact Falcon Electric Customer Service at 1-800-842-6940.
FN -2TXI UPS Models FNB1S7-6K6 Extended Battery Bank
Shipping pallet contents: Shipping pallet contents:
(1) FN -2TXI UPS (verify the exact model shipped) (1) FN Extended Battery Bank
(1) RS-232 Cable
(1) Interface Cable
(1) UPSilon Software CD (1) Installation Kit
(1) Software Interface Cable
(1) Owner’s Manual
NOTE: If multiple FN UPS units were received for connection in parallel, please verify
that one parallel interface cable kit has been received for each FN unit received.
3.1 Unpacking Instructions
1. Cut the bands securing the protective carton and lift it off of the UPS or battery bank.
2. Remove the (8) upright boards from the upper and lower crate assemblies.
3. Remove the upper crate piece off of the top of the UPS or battery bank.
4. Using a fork lift position the forks under the UPS or battery bank and lift it out of the lower
shipping cradle.
Note: The UPS or extended battery bank weighs over 300 pounds. It is not
recommended that you attempt to lift and remove them from the shipping pallet
without the proper equipment.
Unpacking Details