AUTO SCAN SETTINGS
Auto Scan is ideal for a 2+ camera installation where you want the
monitor to automatically switch between Camera 1 and Camera 2.
The time can be set between 5 seconds and 45 seconds delay.
Press the power button
to turn on the monitor.
Press the MENU button
on the monitor.
Use the Up
or Down
button to navigate to the Auto Scan
Setting button
then press V1/V2
To select this feature.
SETTING UP CAMERA
Use the Up
or Down
button, to select the camera you want
to put into auto scan mode, then press V1/V2
to select the
camera. Select ON or OFF and press V1/V2
to save and exit.
