25
7.0 SERVICING
BEFORE ATTEMPTING ANY MAINTENANCE, ISOLATE THE
APPLIANCE AT THE MAINS SWITCH AND TAKE STEPS TO
ENSURE THAT IT IS NOT INADVERTENTLY SWITCHED ON.
THERE ARE NO SERVICEABLE COMPONENTS LOCATED
IN THE ELEMENT HEAD. THE MICRO SWITCH IS LOCATED
IN THE PIVOT HOUSING OF THE ELEMENT ASSEMBLY AS
SHOWN IN STEP 7.5.
THE ELEMENT HEAD IS A NON SERVICEABLE
COMPONENT. REMOVING THE ELEMENTS FROM THE
ELEMENT HEAD OF THE APPLIANCE WILL UNSEAT THE
GASKET. THIS WILL LEAD TO THE INGRESS OF FOOD AND
GREASE DEBRIS INTO THE ELEMENT HEAD ASSEMBLY.
IF THERE IS A FAULT WITH THE ELEMENTS ON THE
APPLIANCE THE COMPLETE ELEMENT HEAD ASSEMBLY
SHOULD BE REPLACED AS INSTRUCTED BELOW IN STEP
7.6.
Содержание E9460
