Falcon E9460, Инструкция для пользователя, по установке и обслуживанию

Страница: 21 / 37

21
THIS APPLIANCE MUST BE EARTHED
6.4 COMMISSIONING
Refer to section 2.0 for operation. Carry out the following operation:
6.4.1 Turn on mains power supply on.
6.4.2 Ensure red neon illuminates.
6.4.3 Turn control knob to the clean setting.
6.4.4 Let the appliance heat up. At this setting the chargrill is constantly on and can reach
temperatures up to 400
o
C.
6.4.5 Switch appliance off.
This appliance is also provided with a terminal for connection of an
external equipotential conductor. This terminal is an effective electrical
contact with all fixed exposed metal parts of the appliance, and shall
allow the connection of conductor having a nominal cross-section area
of up to 10mm². It is located at the rear of the unit and identified by the
following label and must only be used for bonding purposes.
If the appliance does not operate correctly please refer to section 9.0 and rectify the
problem.
PLEASE FILL OUT THE INFORMATION TABLE ON THE
FRONT COVER AFTER COMMISSIONING.