Falcon E9042, Инструкция для пользователя, по установке и обслуживанию

Страница: 15 / 34

15
6.3 COMMISSIONING
6.3.1 Remove rear hatch
6.3.2 Connect appliance to mains supply
6.3.3 Refer to section 2.3 or 2.4 for operation.
6.3.4 This appliance is also provided with a terminal for connection of an external
equipotential conductor. This terminal is an effective electrical contact with all fixed
exposed metal parts of the appliance, and shall allow the connection of conductor
having a nominal cross-section area of up to 10mm². It is located at the rear of the
unit and identified by the following label and must only be used for bonding purposes.
PLEASE FILL OUT THE INFORMATION TABLE ON THE FRONT COVER
AFTER COMMISSIONING.