6
10
Communication
error
Re-set required
Failure on LIN or CAN-Bus
Switch unit off for 10 seconds, then on.
Engineer required.
User
Engineer
11
Initialisation
error
Re-set required
Software failed when initialising
hardware
Switch unit off for 10 seconds, then on
Wait. Generator will re-set every
30 seconds. Engineer required.
User
Engineer
12
Current
reading failure
Re-set required
Generator detects that current
does not reflect what controls
require
Switch unit off for 10 seconds, then on
Engineer required.
User
Engineer
13
Mains
connection
error
Re-set required
Mains voltage is too high or
too low
Switch unit off for 10 seconds, then on.
Engineer required.
User
Engineer
14
Mains
connection
error
Re-set required
Mains voltage is too high or
too low
Switch unit off for 10 seconds, then on.
Engineer required.
User
Engineer
15
Coil electrical
circuit
self protected
Re-set required
Refer to Fault 04
Switch unit off for 10 seconds, then on.
Refer to Fault 04.
User
Engineer
Code
Error
Cause
Action
U / E
