5
01
Pan
detection
error
Use of unsuitable wok material
Re-set required
Defective coil
Use suitable wok.
Switch unit off for 10 seconds, then on.
Engineer required.
User
Engineer
02
No coil
current
Re-set required
Coil failure
Switch unit off for 10 seconds, then on.
Engineer required.
User
Engineer
03
Excessive
generator
temperature
Re-set required
Air flow / filter blocked
Excessive ambient temperature
Generator error
Switch unit off for 10 seconds, then on.
Clean filter/remove obstruction.
Ventilate working area.
Switch off. Allow to cool. Replace generator.
User
Engineer
04
Excessive
cooking
zone
temperature
Re-set required
Wok empty or too hot
Wok base damaged
Faulty temperature sensor
(constantly recording ambient)
Switch unit off for 10 seconds, then on.
Check wok has not boiled dry or is empty.
Check/replace wok.
Engineer required.
User
Engineer
05
Control
failure
Faulty control or incorrect wiring
Switch unit off for 10 seconds.
Check control connections to generator.
Replace control assembly.
User
Engineer
06
Internal
temperature
of generator
excessive
Re-set required
Switch unit off for 10 seconds, then on.
Refer to Fault 03.
User
Engineer
07
Cooking
zone
temperature
sensor
Reset required
Switch unit off for 10 seconds, then on
Check sensor connections. Replace coil
assembly. Refer to Fault 04.
User
Engineer
08
Mains supply
failure
Re-set required
Fault with mains supply
Switch unit off for 10 seconds, then on.
Check mains supply.
User
Engineer
09
N/A
N/A
N/A
Code
Error
Cause
Action
U / E
