The Falcon Power Supply Unit (PSU) is a microprocessor controlled digital regenerative AC
power source used for accurate speed control of a turntable motor. The Falcon will work with any
AC Synchronous motor that is 5W or less. The PSU uses Direct Digital Synthesis (DDS) to create
an extremely accurate and clean sine wave that improves motor speed stability and allows the user
to precisely adjust the turntable platter rotational speed.
The PSU is extremely easy to use and set up. All of the operating parameters are stored in
non-volatile memory and the device always power up with the last used speed and frequency offset
displayed. The PSU is powerful enough to start up in either speed selection, so there is no need to
start in 33 RPM, then switch to 45 RPM as in other units.
