
IMPORTING/EXPORTING AND MANAGING CONFIG FILES
ENG
Page 9
5 IMPORTING/EXPORTING AND MANAGING CONFIG FILES
5.1 EXPORTING SINGLE PRESETS, GENERAL CONFIG OR BOTH
The Falcon 50 FM control software contains special tools to selectively export in a file (to be saved on Yr
local Pc, to be emailed, to be held on a CD Rom for future use, etc) a single custom preset (that is, a
processing preset created by the user), all user presets, the general equipment configuration/status (that is:
input setting, output settings, pilot level, passwords, etc) or either the latter ones (all P equipment
Status).
It is strongly recommended to export in afile the actual equipment STATUS as soon as
You have reached a final / good configuration on the processor. This file must be retained for
future use (f.i., to reload a valid configuration after a reset, to clone the same configuration on
multiple units, etc).
To EXPORT single presets, all presets, Status or ‘all’ in a file, click the CONFIG button on the software
screen (placed just below the large navigation buttons).
EXPORT PRESET
Exports in a file the Preset selected in the small black window (from 50 to 99)
EXPORT PRESETS
Exports in a file ALL procesing presets created by the user (from 50 to 99)
EXPORT STATUS
Exports in a file the general configuration (in and out interfaces, levels, passwords,
etc) of the processor. Presets are NOT included.
EXPORT ALL
Exports in a file the general configuration plus ALL user Presets (RECOMMENDED)
Click the desired option and save file following standard operating system procedure.