APPENDIX A
ENG
Page 16
APPENDIX A
7.2 SYSTEM
EVENTS
Using the event logs in Event Viewer, you can gather information about major problems or events occurred
during the equipment life or from the last general hardware reset.
In order not to fill the Logger memory in extra-fast way, for events of the same nature only Time and Date will
be updated.
The presence of hardware errors will help the administrator in knowing the cause of them or in getting faster
repairing service. The logger also shows if and when the system has been turned off/on and if Alarm
conditions arised.
To access the EVENTS LOG Screen, click the SYSTEM tab:
and then the EVENTS page:
The EVENTS screen contain the last 20 system events, with relevant Time and Date
Possible events are:
"NO PRIMARY INPUT SOURCE "
"SYS CLOCK SYNCHRONIZATION"
"TEMPERATURE OVER 60°C "
"SYS CLOCK FAILURE "
"TEMPERATURE OVER 70°C "
"DSP 0 FAILURE "
"DIGITAL INPUT FAILURE "
"DSP 1 FAILURE "
"DIGITAL OUTPUT FAILURE "
"DSP 2 FAILURE "
"ALARM CONDITION "
"DSP 3 FAILURE "
"UART 1 FAILURE (RS-232) "
"NOT VOLATILE MEM FAILURE "
"UART 2 FAILURE (REAR USB)"
"ETHERNET FAILURE "
"UART 3 FAILURE(FRONT USB)"
"UNRECOGNIZED FAULT "
"UART 4 FAILURE (TCP/IP) "
"SYSTEM STATUS RESET "