27
If you have lifted up the hotplate then carefully replace
it taking care not to damage or displace the ignition
electrodes or flame safety probes (arrowed) and replace
the rear fixing screws.
To convert the control taps
Pull off all the control knobs.
Open the oven door & grill door and remove the fixing
screws underneath the control panel.
Remove the 3 fixing screws at the top of the control panel.
Pull the control panel forward. Rest it on the open grill
door and the open right hand oven door:
The tap bypass screw is now accessible. Unscrew the tap
bypass screw.
Using a pair of long nose pliers carefully remove the
bypass screw and fit the correct replacement screw. See
table for correct size. Tighten the screw down.
Repeat for all the burner control taps.
Refit the control panel.
Natural Gas at 20mbar
The 95 jet in burner A is counter-bored and is different to
the non- counter-bored 95 jet in the conversion kit
Burner
Burner rings
A
95
39
original ring
B
120
54
original ring
C
133
96
original ring
LP Gas - Butane at 28-30 or Propane at 37mbar
Use the non counter-bored 95 jet in the conversion kit for
burner C
Burner
Burner rings
A
64
32
original ring
B
82
40
original ring
C
95
57
Large ring in
conversion kit
Содержание 1092 Continental Induction G5
Страница 1: ...1092 CT Dual Fuel User s Manual Installation and Servicing Instructions U109410 04...
Страница 36: ......
