BOLERO-LT Hardware Description
Version 1.0.0
6.1.3 Buttons & LEDs
BOLERO-LT comes with 1 x free-programmable push-button
(connected to the
DiWu-pin
known in the STEPPIII)
and 3 x free-programmable LED indicators that
can be used to indicate the status of different components in the the unit. The
"
On/Off
"
button generates
(
IO.e9=redge
)
event which can be used to power on
the unit. However, you have the possibility to configure this button depending
on what configuration is most important for you.
Figure 11:
On/Off button
All LED indicators are accessible with PFAL commands and they can be
interfaced to different components in the device to show their state. The mode
and functionality of these LEDs are software controlled feature. References how
to customize the device configuration, are available in the BOLERO-LT software
manual
“
steppIII_fox_bolero_lt_PFAL_Configuration_Command_Set.pdf
”.
Figure 12:
LED allocation
BOLERO device provides the following LED indicators
Name
LED mode
Function
LED1
Free programmable
Free user programmable
LED2
Free programmable
Free user programmable
LED3
Free programmable
Free user programmable
Table 5:
Modes of the LED’s and associated functions
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
Page 26
