fakro ZWG1, Руководство пользователя

Страница: 4 / 16

3. Controller programming
In order to operate FAKRO electronic accessories, featuring Z-Wave system, by means of the
ZWG1 controller, it is necessary to:
1. Add the device to the “Z-Wave” network (INCLUDE function) – see section 3.1
and
2. Associate the device with a selected pair of buttons on the controller with which user wishes to operate
the device (ASSOCIATE function) – see section 3.2.
In one “Z-Wave” network, there can be included a maximum of 232 devices, i.e. controllers, electronic
accessories for FAKRO roof windows as well as other electronic devices.
Note !!!
Any device which is physically removed from the network (e.g. damaged) should be deleted from the
memory of the controller (PRIMARY, SECONDARY), that is first deleted from the pair of buttons (section
3.4) and then removed from the network (section 3.5). The correct implementation of the procedures is to
ensure optimal communication between devices. Unplugging the device without removing it from the controller
memory will result in a prolonged reaction time to commands and faster depletion of the controller battery. If it
is necessary to remove the damaged equipment, whose removal from the controller memory is not possible, it is
desirable to reconfigure the whole network (all devices). Start a new network configuration from restoring the
controller to the factory settings (DEFAULT function), then call the EXCLUDE function of devices working
correctly and continue to the section 3, "Controller Programming".
Note !!!
Moving the device within the network (e.g. socket module) it is recommended to delete it from the
controller memory (delete it from the pair of buttons first (section 3.4) and then remove from the network
(section 3.5) and then add it again after installation in new place of work.
11.11.15 NC818 4/16 ©2012, FAKRO